Home > Stripping > Consumables > box’ramp

box’ramp

Finally ensure production caused by box‘ramp

All box‘ramp supports any type of dynamical stripping application (pins, claws etc.) and any type of material, such as cardboard, e-flute and corrugated board. Mostly chamfering of lower board side is not requested.

  • by using  transport assistance box‘ramp S and box‘ramp M it is simple to solve bumping of flaps at plywood edges of inner waste hole.
  • using the waste wiper box‘ramp L at all side trim the waste immediately falls always in right direction  and can not interrupt production.
  • special made box‘ramp H to mount afterwards during production by operator. Equipped with extrem strong adhesive and a little end stop a accurate mounting is possible.

box’ramp S

Artikel Nr. | article no.BR200700
Funktionsweite| function width6,0 mm
Einheit | unit500 Stück | pieces
Anwendung | ApplicationInnenabfall | internal waste

box’ramp M

Artikel Nr. | article no.BR300700
Funktionsweite| function width7,0 mm
Einheit | unit500 Stück | pieces
Anwendung | ApplicationInnenabfall | internal waste

box’ramp L

Artikel Nr. | article no.BR400700
Funktionsweite| function width21 mm
Einheit | unit250 Stück | pieces
Anwendung | ApplicationSeitenabfall | side waste

* Führungsarm kann bei Bedarf auf Wunschlänge gekürzt werden | in case of need box'ramp arm can be cut for customized length

box’ramp H

Artikel Nr. | article no.BR500700
Funktionsweite| function width21 mm - selbstklebend | selfe adhesive
Einheit | unit250 Stück | pieces
Anwendung | ApplicationSeitenabfall + Hinterrand | lateral and rear waste

* Zur nachträglichen Anbringung | special made to mount afterwards
* Führungsarm kann bei Bedarf auf Wunschlänge gekürzt werden | in case of need box'ramp arm can be cut for customized length

suitable DXF-files available

Consumables and relatated Products:

PRODUCTS: HYBRIDsetter, EASYsetterNT, Inserting tool
CONSUMABLES: sheet’lift, sheet’presser, Schaumstoff, register’blocks, tie’bolds, clamp’blocks